PART No - 140‐6 Series (NSN 6130-15-0185210)
140-6_140-6d
Description

GENERATOR EQUIPMENT 

4 SOLUTIONS DRIVEN BY A MULTIFUEL ENGINE TO FULFILL THE NEEDING OF ALL THE FLIGHT LINES:
• sole 115Vac 400Hz
• 115Vac 400Hz with contemporary output 28Vdc
• 115Vac 400Hz with contemporary output 270Vdc
• 28Vdc or alternatively 270Vdc

MAIN FEATURES
Ground Power Units, with brushless generator 115VAC 400Hz Diesel driven, depending by the version it could be completed with output 28VDC or alternatively 270Vdc. Trailer steel structure, compliant with SAE-AS-8090, equipped with four pneumatic wheels and a towing bar for a maximum speed of 30 Km/h.

ELECTRICAL OUTPUT
Main supply for all models:
•  AC Output:115/200Vac 400 Hz 3 phases, 80 kVA cos φ 0,8%;
•  DC Output 28Vdc 800A continuous, 2000A Max;
•  DC Output 270Vdc 300A continuous, 500A Max.
Auxiliary outputs for both models:
Single-phase output (socket according to CEI standard), 115 V 400 Hz, Ph+N+Gnd, 16 A max.
Three-phase output (socket according to CEI standard), 115 V 400 Hz, 3Ph+N+Gnd, 16 A max.
28 Vdc output (socket according to CEI standard), 2 poles, 25A max.
270 Vdc output (socket according to CEI standard), 2 poles, 15A max.

PROTECTIONS AND SAFETY DEVICES
Every GPU is normally equipped with the following protection/safety devices:
•  Overvoltage/undervoltage (1st/2nd threshold) on AC output
•  Overfrequency/underfrequency (1st/2nd threshold) on AC output
All the above mentioned devices are on digital cards, fully programmable.
The methods and application are in compliance with STANAG 3457, Ground Electrical Power Supply For Aircraft, and MIL-STD-704F, Aircraft Electrical Power Characteristics.

INSTRUMENTATION
P/N 140-6:
Line Analyzer including: AC digital ammeter, AC digital voltmeter, AC digital frequency
P/N 140-6D:
Line Analyzer including: AC digital ammeter, AC digital voltmeter, AC digital frequency, DC digital ammeter, DC digital voltmeter.
Moreover the following are installed on both models: time counter/RPM readout/fuel level

DIESEL ENGINE
Deutz TCD2013, 4 cylinder 90kW continuous at 2.000 Rpm, equipped with electronic speed control, working with worldwide diesel, Jet Fuels and BioDiesel without any change.
Ambient operative temperature: –20°C + 50°C;
Certified EPA TIER III / EU STAGE3.
Autonomy: up to 8 hours at engine rated power.

ACCESSORIES
Standard: 115Vac 400 Hz output power cable (length 10m) with plug according to Stanag 3303, 28Vdc output power cable (length 10 m) with plug according to Stanag 3302, 270Vdc output power cable (length 10 m) with plug R270G5E
Test stand textile cover, O&M manual, CoC, Test report, AC/DC instrument calibration report.
On request: kit for cold starting up to -32°C or up to -40°C.

COLOUR:
Yellow RAL 1007 standard, other colours on request

REMARKS:
Suitable for Helicopters AW189, AW139, AW169, NH90, EH101, CH47 and similar suitable for Aircrafts C130J, F16, EFA2000 and similar

DIMENSION
LENGHT(mm)
2365
WIDTH(mm)
1400
HEIGHT(mm)
1370
MASS(Kg)
1710

GALLERY
  • 140-6_140-6d
  • dsc00987
  • dsc00999
  • 140-6_140-6d
  • 140-6_140-6d